Sign Companies Edmonton

Installation Instructions

instructional image 1. Clean the surface well with glass cleaner or soapy water.
instructional image 2. Place the decal on the surface in the desired position. Use masking tape to hold the corners.
instructional image 3. Using masking tape make a center hinge.
instructional image 4. Remove corner masking tape and peel one side of the decal away from the backing paper until you reach the center hinge.
instructional image 5. Carefully peel away the backing paper. You may use scissors to remove the paper.
instructional image 6. Lay down the exposed side and firmly rub starting from the center out. You can use a squeegee or a credit card.
instructional image 7. Remove center hinge.
instructional image 8. Repeat as in step 5.
instructional image 9. Repeat as in step 6.
instructional image 10. Firmly rub the entire decal.
instructional image 11. Remove top transfer tape.
instructional image 12. Finished!