b'Emergency Lights NFPA 70 (NEC) ARTICLE 700.1Scope.Emergency Systems are intended to automatically supply illumination.in the event of failure of the normal supply. illumination essential for safety to human life12 (a)Storage Battery.Storage batteries used as source of power for emergency systems shall. maintain the total load for a period of 1 1/2 hours minimum16Emergency Illumination.Emergency illumination shall include all required means of egress lighting, illuminated exit signs, and all other lights specified as necessary to provide required illumination.101 LIFE SAFETY CODE7.9.2.1Emergency illumination shall be provided for not less than 1 1/2 hours in the event of failure of normal lighting.7.9.2.3 The emergency lighting system shall be arranged to provide the required illumination automatically in the event of.interruption of normal lighting.7.9.2.6Battery-operated emergency lights shall use only reliable types of rechargeable batteries.29 CFR 1910.37 (b) Lighting and marking must be adequate and appropriate. (1) Each exit route must be adequately lighted so that an employee with normal vision can see along the exit route. (2) Each exit must be clearly visible and marked by a sign reading Exit(6) Each exitsign must be illuminated to a surface value of at least five foot-candles (54 lux) by a reliable light source and be distinctive in color.(7) Each exit sign must have the word Exit in plainly legible letters not less than six inches (15.2 cm) high, with the principal strokes of the letters in the word Exit not less than three-fourths of an inch (1.9 cm) wide. Combination Emergency Lighted Exit Sign with Emergency LightsIn a power failure, the exit sign stays illuminated and the emergency lights automatically turn on to provide area lighting for up to 90 minutes. Units are hardwired to a reliable electrical source. During a power failure, power is drawn from the internal 6-volt lead calcium rechargeable battery system. Emergency lights automatically shut off and begin to recharge following the return of power. Durable 20-gauge steel housing 12" x 12 1/2" x 2 1/4" 6" high x 3/4" stroke letters 120 or 277 field selectable inputs Capable of powering remote fixtures Faceplates slide out for quick and easy installation Universal mounting pattern and key hole slots are stamped into the backplate Round 3.6W lamps are front-mounted and swivel to provide a full range of coverage UL 924 & ULC/ORD-C924-02 listed (US & Canada)No. Price / EachHigh-output, energy efficient LED technologyPLC450 $313.78LED AC present indicator and push-to-test buttonOther Combination Exit signs are available to meet your application. To receive a quote, please reference part number PLC555 and provide us with your requirements and specifications.Emergency LightsWhen a power failure occurs, emergency lights automatically turn on to instantly illuminate the area for up to 90 minutes. Lights are activated by the rechargeable 6-volt lead calcium battery system. When power is restored, the lights automatically shut off, and the unit begins to recharge. Unit requires hardwire connection to a reliable electrical source.Note: Emergency lights are to be installed in accordance with local codes. Durable 20-gauge steel housing (Without Heads) 9" x 4.7" x 3.2" 120 or 277 field selectable inputs Capable of powering remote fixtures Front access panel is hinged for trouble-free installation Universal mounting pattern and conduit knockouts allow for ease of installation Round 3.6W lamps are top-mounted and swivel to provide a full range of coverage UL 924 & ULC/ORD-C924-02 listed (US & Canada)No. Price / EachDual diagnostic LED display indicates AC/ON and High ChargePLL250 $202.75Push-to-test switchOther Emergency Lights are available to meet your application. To receive a quote, please reference part number PLL555 and provide us with your requirements and specifications.129 signkore.com | 780.406.1888All prices are in Canadian Dollars. Freight/Shipping charges may apply to items not in stock. Prices are subject to change without notice.'